Post by Admin on Mar 16, 2020 11:52:00 GMT
PL-01 Prototype concept tank | POLISH STEALTH TANK
In 2010 another Anders prototype light tank was revealed in Poland. A whole host of armored vehicles were being developed on the Anders platform. These included infantry fighting vehicle, fire support vehicle, anti-tank missile carrier and other. The PL-01 could be also seen as an uparmored version of the Anders.
The PL-01 is based on the Swedish CV90120-T light tank. It also shares some similarities with the Anders light tank, which is based on the same platform. Weight of the PL-01 tank is claimed to to be 35 t. Other sources reported that production tank could weight around 45-50 t.
It was planned that the new Polish tank will have modular protection with multi-layer ceramic-aramid armor. Damaged add-on armor modules would be easily replaced in field conditions. Also newer modules could be fitted once more advanced armor is available. It is claimed that front armor with add-on armor will provide protection against 30- or 40 mm armor-piercing rounds. It was planned that all-round protection will be against 14.5 mm armor-piercing rounds. Such level of protection makes this vehicle closer to modern light tanks than true main battle tanks. It was planned that the hull will have a high level of protection against landmines and improvised explosive devices. This tank was designed to withstand explosions equivalent to 10 kg of TNT anywhere under the hull. It was planned that active protection system will be integrated. Automatic fire suppression and NBC protection system would be fitted as standard.
The new tank has an unmanned turret. Ammunition is stored in a separate compartment with blow-out panels. It was planned that the new tank will be armed with a 120 mm gun, completed with an autoloader. This gun would be capable of firing all standard NATO 120 mm tank ammunition. It was claimed that this tank will be capable of launching anti-tank guided missiles in the same manner as ordinary rounds. Around 40 rounds were planned to be carried for the main gun, including 12-16 ready-to-use rounds. Though it was unknown if it will be possible to replenish the autoloader on the battlefield. It was planned that a tank with a 105 mm gun will be proposed for export customers.
The PL-01 uses stealth technology. It has a thermal camouflage which makes it harder to detect with thermal sensors. It is claimed that the whole tank will be covered with radio wave absorbent material. However it is unknown if angular shapes of this tank were intended to reduce radar cross-section or just to give a more futuristic look.
This tank has have a crew of three, including commander, gunner and driver. Commander and gunner enter and leave the vehicle via a rear hatch. Ammunition is also loaded via the rear hatch. This tank has a capability to carry up to four additional soldiers inside the hull in place of ammunition.
The PL-01 is based on the chassis of the Swedish CV90 IFV which has been around for a while and recommended itself well. Engine compartment is located at the front of the hull. It was planned that this tank will be powered by a diesel engine developing around 1 000 hp, possibly of German origin. An automatic transmission was also planned. It was claimed that the PL-01 will have a cross-country speed of 50 km/h. The PL-01 can be fitted with a deep wading kit.
