Post by bazooka on Aug 18, 2019 19:23:21 GMT
Safety fuse
A major contributor to progress in the use of explosives was William Bickford, a leather merchant who lived in the tin-mining district of Cornwall, England. Familiar with the frequency of accidents in the mines and the fact that many of them were caused by deficiencies inherent in the quill fuse, Bickford sought to devise an improvement. In 1831 he conceived the safety fuse: a core of black powder tightly wrapped in textiles, one of the most important of which was jute yarn. The present-day version is not very different from the original model. The cord is coated with a waterproofing agent, such as asphalt, and is covered with either textile or plastic.
The safety fuse provided a dependable means for conveying flame to the charge. Its timing (the time required for a given length to burn) was amazingly accurate and consistent, compared to that of its predecessors, and it was much better from the standpoints of resistance to water and abuse.
Underground coal mining was formerly by far the largest consumer of black powder. From a performance standpoint, it is probably the best explosive for that purpose. Its relatively gentle, heaving action gives a high yield of lump and leaves the coal in good position for rapid loading. Before the advent of oil, gas, and electric heating and cooking, coal was produced in tremendous quantities for household use and lump demanded a premium price. But black powder has a dangerous tendency to ignite coal gas (mostly methane) and coal dust, and many mine explosions occurred. About 1880 several European governments, seeking to develop safer substitutes for black powder, set up testing stations. Similar action was taken in the United States a few years later. The result was a series of special dynamites approved for use in gassy and dusty coal mines when used in the specified manner. Their blasting action was not as good as that of black powder, but they were much safer. These dynamites are discussed below.
A major contributor to progress in the use of explosives was William Bickford, a leather merchant who lived in the tin-mining district of Cornwall, England. Familiar with the frequency of accidents in the mines and the fact that many of them were caused by deficiencies inherent in the quill fuse, Bickford sought to devise an improvement. In 1831 he conceived the safety fuse: a core of black powder tightly wrapped in textiles, one of the most important of which was jute yarn. The present-day version is not very different from the original model. The cord is coated with a waterproofing agent, such as asphalt, and is covered with either textile or plastic.
The safety fuse provided a dependable means for conveying flame to the charge. Its timing (the time required for a given length to burn) was amazingly accurate and consistent, compared to that of its predecessors, and it was much better from the standpoints of resistance to water and abuse.
Underground coal mining was formerly by far the largest consumer of black powder. From a performance standpoint, it is probably the best explosive for that purpose. Its relatively gentle, heaving action gives a high yield of lump and leaves the coal in good position for rapid loading. Before the advent of oil, gas, and electric heating and cooking, coal was produced in tremendous quantities for household use and lump demanded a premium price. But black powder has a dangerous tendency to ignite coal gas (mostly methane) and coal dust, and many mine explosions occurred. About 1880 several European governments, seeking to develop safer substitutes for black powder, set up testing stations. Similar action was taken in the United States a few years later. The result was a series of special dynamites approved for use in gassy and dusty coal mines when used in the specified manner. Their blasting action was not as good as that of black powder, but they were much safer. These dynamites are discussed below.
The use of black powder in underground coal mines is no longer allowed in most countries. As a result, black powder production has decreased tremendously. Further, black powder is now more expensive than dynamite and is used only for special purposes. There is, for example, no substitute for black powder in certain military applications, and nothing equal to it has yet been found for the manufacture of the safety fuse. The fact that black powder is relatively nonshattering is of value in blasting certain types of stone.