Post by bazooka on Aug 18, 2019 20:33:57 GMT
Ammonium nitrate
After the straight dynamites and gelatins, the next important advance in dynamite was the substitution of ammonium nitrate for part of the nitroglycerin to give a safer and less expensive product. The use of ammonium nitrate in explosives had been patented by others in Sweden in 1867, but it was Nobel who made the new “extra dynamites” successful by devising gelatins that contained from 20 to 60 percent ammonium nitrate.
During the period 1867–84, many people worked to develop nongelatinous ammonium nitrate mixtures, but nothing of value resulted, largely because ammonium nitrate is too hygroscopic; that is, it picks up moisture too readily. In 1885 R.S. Penniman, an American, found a solution to the problem by coating the ammonium nitrate with a small percentage of paraffin, or some similar substance, prior to use. With this development a series of ammonia dynamites soon became popular. Coating was discontinued when other, safer means were developed to handle the moisture problem.
All major underground-coal-mining countries have similar explosives and regulations. In the United States explosives that have been approved by the U.S. Bureau of Mines for use in underground coal mines are called permissibles. Besides passing the Bureau’s safety tests, these explosives must be used in a manner specified by the Bureau. In England the explosives are known as permitted; in France, explosifs antigrisouteux; in Belgium, explosifs S. G. P. (sécurité, grisou, poussière); and in Germany, schlagwettersichere Sprengstoffe. Almost without exception the major ingredient in these explosives is ammonium nitrate, chosen because of its low explosion temperature, and nearly all of them contain a cooling agent such as sodium chloride (common salt) or ammonium chloride to prevent the heat of their explosion in a mine from igniting underground gases such as methane, or a combination of them and coal dust, and causing a fire or disastrous secondary explosion. The sensitizer is usually a small amount of nitroglycerin, but in some cases it is TNT, trinitrotoluene (discussed later); for example, it is said that a typical Russian permissible would be 68 percent ammonium nitrate, 10 TNT, 20 sodium chloride, and 2 powdered bark.
As synthetic ammonia became less expensive because of improvements in manufacture and a raw material change from coal to natural gas, the explosives industry concentrated its efforts on substituting ammonium nitrate for nitroglycerin. Two important products were (1) low-density ammonia dynamites and (2) semigelatins. Prior to their development, the density of most dynamites was about the same and was quite high. Strength was changed in the different grades by varying the amount of explosives used. The new concept was to employ the strongest formula possible, with a minimum of nitroglycerin and a maximum of ammonium nitrate, and to dilute it systematically with suitable low-density ingredients such as bagasse (the pulp remaining after extraction of sugar from the cane) so that one stick of the new product would give the same blasting action as one of the old. This provided a substantial saving to the user because the cost per stick of the new product was much lower.
The only difference between the low-density ammonia dynamites and the semigelatins is that the latter are partially gelatinized through the use of nitrocellulose and a higher nitroglycerin content. This gelatinization provides good water resistance and a degree of plasticity that is desirable in loading holes prior to blasting.
After the straight dynamites and gelatins, the next important advance in dynamite was the substitution of ammonium nitrate for part of the nitroglycerin to give a safer and less expensive product. The use of ammonium nitrate in explosives had been patented by others in Sweden in 1867, but it was Nobel who made the new “extra dynamites” successful by devising gelatins that contained from 20 to 60 percent ammonium nitrate.
During the period 1867–84, many people worked to develop nongelatinous ammonium nitrate mixtures, but nothing of value resulted, largely because ammonium nitrate is too hygroscopic; that is, it picks up moisture too readily. In 1885 R.S. Penniman, an American, found a solution to the problem by coating the ammonium nitrate with a small percentage of paraffin, or some similar substance, prior to use. With this development a series of ammonia dynamites soon became popular. Coating was discontinued when other, safer means were developed to handle the moisture problem.
All major underground-coal-mining countries have similar explosives and regulations. In the United States explosives that have been approved by the U.S. Bureau of Mines for use in underground coal mines are called permissibles. Besides passing the Bureau’s safety tests, these explosives must be used in a manner specified by the Bureau. In England the explosives are known as permitted; in France, explosifs antigrisouteux; in Belgium, explosifs S. G. P. (sécurité, grisou, poussière); and in Germany, schlagwettersichere Sprengstoffe. Almost without exception the major ingredient in these explosives is ammonium nitrate, chosen because of its low explosion temperature, and nearly all of them contain a cooling agent such as sodium chloride (common salt) or ammonium chloride to prevent the heat of their explosion in a mine from igniting underground gases such as methane, or a combination of them and coal dust, and causing a fire or disastrous secondary explosion. The sensitizer is usually a small amount of nitroglycerin, but in some cases it is TNT, trinitrotoluene (discussed later); for example, it is said that a typical Russian permissible would be 68 percent ammonium nitrate, 10 TNT, 20 sodium chloride, and 2 powdered bark.
As synthetic ammonia became less expensive because of improvements in manufacture and a raw material change from coal to natural gas, the explosives industry concentrated its efforts on substituting ammonium nitrate for nitroglycerin. Two important products were (1) low-density ammonia dynamites and (2) semigelatins. Prior to their development, the density of most dynamites was about the same and was quite high. Strength was changed in the different grades by varying the amount of explosives used. The new concept was to employ the strongest formula possible, with a minimum of nitroglycerin and a maximum of ammonium nitrate, and to dilute it systematically with suitable low-density ingredients such as bagasse (the pulp remaining after extraction of sugar from the cane) so that one stick of the new product would give the same blasting action as one of the old. This provided a substantial saving to the user because the cost per stick of the new product was much lower.
The only difference between the low-density ammonia dynamites and the semigelatins is that the latter are partially gelatinized through the use of nitrocellulose and a higher nitroglycerin content. This gelatinization provides good water resistance and a degree of plasticity that is desirable in loading holes prior to blasting.
Means are available to obtain a moderate amount of water resistance in the ammonia dynamites without resorting to gelatinization of the nitroglycerin. The most common involve the use of water repellents, such as calcium stearate, and ingredients that form a water gel on the surface of the dynamite that slows down the further penetration of water. Examples of the latter are pregelatinized starch products and rye flour.